BBKYG - A-PROCESS CHARGE
- MSDS: BBKYG
- Manufacturer: SOUTHERN CALIFORNIA CHEMICAL CO INC
- Product Name: A-PROCESS CHARGE
- National Stock Number: 6850-00F002433
Product Identification
Product ID:A-PROCESS CHARGE
MSDS Date:01/01/1987
FSC:6850
NIIN:00F002433
MSDS Number: BBKYG
Responsible Party
SANTA FE SPRINGS, CA 90670-5000
Emergency Phone: 213-698-8036
Info Phone: 213-698-8036
Cage: SCALI
Contractor
Telephone: 213-245-6849
Cage: SCALI
Ingredients
COPPER (DUST & MIST), BRONZE POWDER *97-2*
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 12%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AMMONIA VAPORS
CAS: 7664-41-7
Fraction By Weight: 10%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION & CONJUNCTIVITIS.
INHALATION: IRRITATION OF THE NOSE & THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, SWELLING, COUGHING, SHORTNESS,
VOMITING.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: THOROUGHLY WASH FOR 15
MINS. SKIN: DON'T APPLY OINTMENTS/SALVES. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NONE
Lower Limits:16
Upper Limits:25
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE/DRY CHEMICAL.
Unusual Fire/Explosion Hazard:AMMONIA FUMES PRESENT MODERATE FIRE AND
EXPLOSION HAZARDS WHEN NEAR A FLAME.
Accidental Release
Spill Release Procedures:USE WATER SPRAY TO KNOCK DOWN VAPORS. FLUSH
W/WATER. KEEP AWWAY FROM METALS & METAL CONTAINERS. DIKE/ABSORB
W/DIRT, VERMICULITE, SAND, FLY ASH/OTHER INERT ABSORBENT.
Neutralizing Agent:VINEGAR
Handling
Handling and Storage Precautions:DON'T STORE <55F. STORE AWAY FROM HEAT
& OUT OF SUNLIGHT.
Other Precautions:LOOSEN DRUM CAPS W/CAUTION & REMEMBER ODOR IS
PUNGENT.
Exposure Controls
Respiratory Protection:2-5 TIMES TLV: NO RESPIRATOR; 5-10 TIMES TLV:
CANISTER GAS MASK.
Ventilation:MECHANICAL: BLOWER DRAFT USUALLY REQUIRED. KEEP SOLUTION
ENCLOSED.
Protective Gloves:NEOPRENE
Eye Protection:SEALED GOGGLESS
Other Protective Equipment:NEOPRENE APRON AND BOOTS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212-214F
Vapor Pres:71.8
Vapor Density:0.6
Spec Gravity:1.21
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR DARK BLUE W/A STRONG AMMONIACAL ODOR.
Percent Volatiles by Volume:17%
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:HEAT, SUNLIGHT.
Hazardous Decomposition Products:AMMONIA GAS.
Disposal
Waste Disposal Methods:NEUTRALIZE WITH DILUTE VINEGAR/DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS. CORROSIVE MATERIAL UN 1719.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.